Bailey & Mackey TYPE :1392P 05 890 840 10 ürününü Türkiye 'den Satın Alın

pressure switch

Pressure Switch 5 A. 250 V. 207 Q, Rated Current: 5Amp, Ac Nominal Voltage:250Volt,Range: 5-160 PSI,P / Reducer Pve-16D , Serial 69153, 1/2 Npt

Range: -1 to BAR

Diferansiyel Basınç Anahtarı Aralığı:

Pressure Switch Range: 1 to 3 bar (Set at 1.4 bar Rising) Process connection: 7/8” BSP Male, 316 Stainless Steel flow through base, with a PTFE/Nitrile bonded diaphragm. Switch Cover Plastic coated

SWITCH,PRESSURE,ATEX,PRESSURE RANGE 3-14 BAR,DELUGE SYSTEM ZONE #1 TO ZONE #8,SERIES 5000,TYPE 5381,NOTIFICATION NUMBER11044079

Type 1381Q Pressure Switch as serial number 9256{ 0{6 Range: -1 to +1 Overload Protected to 28 bar Process Connection:112" BSP male, parallel Wetted parts: brass connection with a beryllium copper diaphragm Seal: Nitrile Switch housing ingress protected to lP65 SPDT microswitch rated 10A @ 250V ac CE marked Stock Code: 52A23

STLESS STEEL PROTECTION DISC

PTFE FLAT SEALING GASKET

BERYLLIUM COPPER DIAPHRAGM

Pressure range 0,2 - 4bar .

SWITCH ASSEMBLED IN BRACKET

water flow switch, #0380323003, type SPDT, model 1382, rating 15 amp, 250V range 2-40 psi.

(Type 14P Pressure Switch Range: 0.4 to 4 bar Process Connection: 1/8” BSP male, taper Wetted parts: brass connection with a beryllium copper diaphragm Seal: Nitrile Electrical Connection: 4-pin plug & socket SPDT microswitch)

sensor temp.200°c,7 à 8 bars

Basınç anahtarı

Pressure Switch Range: 0.2 – 4 bar Process Connection: 1/4” BSP male, parallel Wetted parts: brass connection with a beryllium copper diaphragm Seal: PTFE Switch housing ingress protected to IP65 SPDT microswitch rated 10A @ 250V ac CE marked

Diferansiyel Basınç Şalteri

Basınç Anahtarı

Pressure Switch Range: 0.4 to 4 bar Process Connection: 1/8” BSP male, taper Wetted parts: brass connection with a beryllium copper diaphragm Seal: Nitrile SPDT microswitch

Twin Circuit Pressure Switch Range: 2 – 28 bar Process Connection: ¾ ”NPT male Wetted parts: brass connection with a beryllium copper diaphragm Seal: Nitrile Electrical Entry: 7-pin plug & socket Switch housing ingress protected to IP65 SPDT microswitches rated 5A @ 250V ac C/W push on crimp connectors CE marked

(Type 2382 Twin Circuit Differential Pressure Switch Range: 0.07 – 1 bar Process Connection: 1/4” BSP female, parallel Wetted parts: brass chambers with a beryllium copper diaphragm Seal: Nitrile Switch housing ingress protected to IP65 SPDT microswitches rated 5A @ 250V ac Max line pressure 34 bar C/W wall mounting bracket and push on crimp connectors)

Pressure Switch

(Type 3312 Differential Pressure Switch Range: 0.07 to 1 Bar External adjustment and Adjustable Reset Differential. Pressure chambers in 316 Stainless Steel and both connections fitted with 0.5 metres of Stainless Steel clad flexible capillaries connected to remote transmitting diaphragm assemblies System oil filled under vacuum Process connections: 1/4” NPT Female, in UPVC with PTFE transmitting diaphragm protection discs and fitted with 12 hole HALAR (ECTFE) lined mounting rings Seals: PTFE Mounting brackets in polished 316 Stainless Steel fitted to switch and remote transmitters SPDT switch, contact rating 10A at 250V AC Electrical entry: 20mm conduit adapter in 316 Stainless Steel Switch cover in 304 Stainless Steel Max line pressure 11 bar System hydrostatic test: 8 bar for 30 minutes)

100mm Dia, Diaphragm Pressure Gauge Range: 0-3000mmH20 & 0-30000 Pa Process Connection:318" BSP male, parallel, bottom entry, direct mounting Wetted parts: brass connection with a beryllium copper diaphragm

Pressure Gauge

Basınç Anahtarı